Sonia Stamatelos Administrator Posts: 25 9/30/2024

Sonia Stamatelos Administrator Posts: 25 The Bar strip can be used to display data obtained from a visual assessment, usually containing degree and extent data, as an alternative to the Degree-Extent strip (see this post for details). Similar to the Degree-Extent strip, each Bar strip represents a different defect. By plotting the data in a bar chart format, the bar height represents the extent and the bar colour represents the degree rating of each defect. The following example shows a Stripmap output comparing the two approaches. Below is an example of how you need to define a Bar strip in your Stripmap Setup file. The figure below highlights the most important properties that need to be defined for a Bar strip visual setup. For all other properties, please use the values shown in this example, even if these properties are not used explicitly in the setup for visual data. edited by on 9/30/2024 edited by on 10/7/2024

0 link

---